ADVANCER® Shelves for Electric Kilns
Save Kiln Space. Save Energy. Save Money.
-
15″ x 15″ x 5/16″ Full 8 Sided ADVANCER® Kiln Shelf
6 lb. 2600ºF max.$190$165Order Now
-
15″ x 7.5″ x 5/16″ Half 8 Sided ADVANCER® Kiln Shelf
3 lb. 2600ºF max.$109$95Order Now
-
20″ x 10″ x 5/16″ Half 10 Sided ADVANCER® Kiln Shelf
5 lb. For 3″ wall kilns. 2600ºF max.$184$171Order Now
-
20″ x 20″ x 5/16″ Full 10 Sided ADVANCER® Kiln Shelf
10 lb. For 3″ wall kilns. 2600ºF max.$299$260Order Now
-
21″ x 10.5″ x 5/16″ Half 10 Sided ADVANCER® Kiln Shelf
6 lb. For 2.5″ wall kilns. 2600ºF max.$190$165Order Now
-
21″ x 21″ x 5/16″ Full 10 Sided ADVANCER® Kiln Shelf
12 lb. For 2.5″ wall kilns. 2600ºF max.$311$270Order Now
-
26″ x 13″ x 5/16″ Half 12 Sided ADVANCER® Kiln Shelf
8 lb. For 3″ wall kilns. 2600ºF max.$213$185Order Now
-
26″ x 26″ x 5/16″ Full 12 Sided ADVANCER® Kiln Shelf
16 lb. For 3″ wall kilns. 2600ºF max.$443$385Order Now
-
13″ x 26″ x 5/16″ Rectangular ADVANCER® Kiln Shelf
9 lb. Center shelf for most oval kilns. 2600ºF max.$299$260Order Now
-
16″ x 16″ x 16″ x 5/16″ ADVANCER® Triangular Plate Stacker
7 lb. For 12″ diameter unfired plate with 1.5″ diameter center vent hole. 2600ºF max.$110Order Now
Call 866-545-6743 for ordering and availability.
If you are uncertian please contact us for the correct size to fit your electric kiln.
Kilnshelf’s Exclusive Multi-Sided Plates. ADVANCER® kiln shelves are available in 8, 10 and 12-sided shapes to fit most top loading electric kilns (full and half), and are the only silicon carbide shelves tested and recommended for use in resistance coil element kilns. At only 5/16-inch thick, ADVANCER® kiln shelves allow for significantly more stacking space when compared to conventional 5/8” and 1” thick cordierite kiln shelves. As photo above illustrates, it is easy to put 6 ADVANCER® shelves in the height required for 5 cordierite shelves giving an additional 20% stacking space! At less than half the weight of conventional shelves, ADVANCER® kiln shelves are far easier to handle and lift in and out of the kiln with less stress to your hands and back.
Lower mass and faster heat transfer (greater thermal conductivity) means shorter firing cycles and reduced energy consumption. No wonder an increasing number of potters are improving productivity and saving money using ADVANCER® kiln shelves in their electric kilns!
Important Information on Firing with ADVANCER® in Resistance Coil Element Kilns
View ADVANCER® CN-703 Technical Bulletin for complete information.
Proper storage and drying requirements for ADVANCER® Kiln Shelves.
Call 866-545-6743 to order now or contact us.
TYPICAL PROPERTIES | CORDIERITE | ADVANCER® |
---|---|---|
Max Use Temperature °F | 2372 – Cone 10 | 2642 – Cone 16 |
Porosity (%) | 30 | 1 |
Strength at Room Temp. (PSI @ 68 °F) | 1,450 | 24,500 |
Strength Under Fire (PSI @ 1250 °F) | 1,305 | 25,500 |
Thermal Conductivity (BTU-in./hr.ft2 °F) | 8 | 125 |
Weight of a 24” x 12” Shelf | Up to 21 lbs. | 8 lbs. |